Problem with multiple screens
- LaserSpain
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
6 years 6 months ago #337
by LaserSpain
Problem with multiple screens was created by LaserSpain
Hi guys,
When working with multiple screens I've detected the following issue:
Moving the mouse over Showeditor icon in the taskbar it shows all the opened windows. To have the program in main screen you need to right click --> maximize
In these case, any other windows program would return to laptop main window automatically, while Showeditor seems to remain on the disconnected screen.
Regards,
Daniel
When working with multiple screens I've detected the following issue:
- open Figure Editor
- move the window to the secondary screen
- close Showeditor
- close the laptop and disconnect the second screen
- ...travel to destination...
- open Showeditor
- nothing appears on laptop main screen
Moving the mouse over Showeditor icon in the taskbar it shows all the opened windows. To have the program in main screen you need to right click --> maximize
In these case, any other windows program would return to laptop main window automatically, while Showeditor seems to remain on the disconnected screen.
Regards,
Daniel
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
Less
More
- Posts: 338
- Thank you received: 42
6 years 6 months ago #338
by Tschosef
Replied by Tschosef on topic Problem with multiple screens
Hello Daniel..
i know this "problem".... there is already a solution implemented. May be, this is a other usage than in "most windows applications" . . .
If you are missing a Window, use the Menue of Figure Editor
Click Menue ==> Windows ==> Options ==> Reset Windows Positions
after restart you have default Windows Positions
hope this will help
best regards
Erich
i know this "problem".... there is already a solution implemented. May be, this is a other usage than in "most windows applications" . . .
If you are missing a Window, use the Menue of Figure Editor
Click Menue ==> Windows ==> Options ==> Reset Windows Positions
after restart you have default Windows Positions
hope this will help
best regards
Erich
Please Log in or Create an account to join the conversation.
- LaserSpain
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
6 years 6 months ago #340
by LaserSpain
Replied by LaserSpain on topic Problem with multiple screens
Thanks a lot, it worked!
In fact I've verified that this solution exists in the manual, chapter 4 (page 38).
In fact I've verified that this solution exists in the manual, chapter 4 (page 38).
Please Log in or Create an account to join the conversation.