How to set ShowNet - DMX Out
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
The light has a DMX terminator connected to the output.Yes, I read the manual.
Maybe I'm making a mistake in this setup.
www.showeditor.com/en/manual/8-options-s...-5-tab-midi-dmx.html
Thank you for your help.
Attachments:
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
I will ask. Internal ShowNet have the same ILDA - DMX connection as this adapter?
After all, when I enter a TimeLine macro with a DMX command, ShowEditor must send that command to the DMX output. However, I do not want to control the Laser with DMX In. DIL switches have all Off (DHCP) set.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Administrator
- Posts: 250
- Thank you received: 21
If you want to use DMX out with an external ShowNET, you need the DMX adapter to get the DMX out of the ILDA line. If you have an internal DMX, you can use the DMX connectors at your laser. Remember: if you use the DMX at the laser, do not link any other DMX control to this same universe
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Administrator
- Posts: 250
- Thank you received: 21
If you want to use DMX out with an external ShowNET, you need the DMX adapter to get the DMX out of the ILDA line. If you have an internal DMX, you can use the DMX connectors at your laser. Remember: if you use the DMX at the laser, do not link any other DMX control to this same universe
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Would a description be possible?
I've tried different combinations of settings, but I may be making a mistake.
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Attachments:
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
- Posts: 338
- Thank you received: 42
i will test this today, and reply soon.
Did you select your interface as an DMX Output in the Showeditor Software ==> Options ==> DMX / MIDI ?
best regards
erich
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
- Posts: 338
- Thank you received: 42
i think you are right, it is not working..... i will ask the Developer of the device.... and reply then.
greez
Erich
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
I'm glad this forum is alive.
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
- Posts: 338
- Thank you received: 42
now i have more Informations.
The DMX Out ist just a DMX Throu port (hard wired) .... it is also used as an output, when the Device is the Master device in a chain of devices, but the DMX Out is not usable to output the DMX values from laser software. Because this, i think you need a external ShowNET With ILDA Cable Whip for DMX Output.
The DMX Input is working.
Greez
Erich
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
- Posts: 338
- Thank you received: 42
the manufacturer told me today, they will put this problem on the To Do List for next Firmware update.
best regards
Erich
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
That's very good from the right. And will it work out only Software? I'm not very optimistic. It is interesting that no one has solved this problem.
It should be as soon as possible.
Thank you very much, for your interest and great help.
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
It's been almost a year and I'm still in the same place. The DMX output from the integrated ShowNet still does not work. The manufacturer is silent and I did not find any Firmware fix.
I bought more lights and I can't control them together with the laser.
I control the lights with an interface Daslight DVC4 GOLD.
But again I can't connect the laser via DMX In with this program.
I think I'll forget about ShowNet. I wanted to buy QuickShow from Pangolin, but it needs another Entec interface to control DMX. That would be a lot of money for home entertainment.
Is there any software in which I can program laser and DMX lights together?
Can you help me? Please.
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Administrator
- Posts: 250
- Thank you received: 21
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Penax
- Topic Author
- Offline
- Junior Member
- Posts: 34
- Thank you received: 0
In ShowEdit, no change. I see DMX Out active only in the DMX Monitor, but no change on the physical output.
I will try to create a file in ScanLibrary where the channels will correspond with Integrated ShowNet.
I wish you all the best in the new year.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Administrator
- Posts: 250
- Thank you received: 21
You find most available Profiles / personalities here (Avolites is implemented directly to their personality distribution) :
www.laserworld.com/en/support-and-servic...lities-profiles.html
Updates will follow in the next months, also covering many more control systems.
Please Log in or Create an account to join the conversation.