Enttec Pro as DMX input?
- mixakoo
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
4 years 2 months ago - 4 years 2 months ago #729
by mixakoo
Enttec Pro as DMX input? was created by mixakoo
Just wondering....
Gear:
Laserworld Shownet Interface
Laptop w/ Showeditor
Enttec DMX USB Pro
Is there any change to trigger Showeditor with dmx using Enttec as an dmx input for the software?
Thank you all
Gear:
Laserworld Shownet Interface
Laptop w/ Showeditor
Enttec DMX USB Pro
Is there any change to trigger Showeditor with dmx using Enttec as an dmx input for the software?
Thank you all
Please Log in or Create an account to join the conversation.
- Tschosef
- Offline
- Moderator
Less
More
- Posts: 338
- Thank you received: 42
4 years 2 months ago #733
by Tschosef
Replied by Tschosef on topic Enttec Pro as DMX input?
Hello
your ShowNET Interface have already DMX IN and OUT implemented!
You simply need a Laserworld DMX Adapter ILDA - XLR
for example
www.thomann.de/de/laserworld_dmx_adapter_ilda_xlr.htm
25Pin Sub-D:
Pin 10 dmx in +
Pin 23 dmx in -
Pin 11 dmx out+
Pin 24 dmx out -
Because this, the enttec interface is actually not supportet.
Using the DMX Input, you are able to trigger the live window functions
The DMX Output is usable to create some DMX Output with the timeline editor... for example to use simple DMX Devices, or to trigger DMX Controller (Software), for example Sunlitesuite or DMX Control....
best regards
Erich
your ShowNET Interface have already DMX IN and OUT implemented!
You simply need a Laserworld DMX Adapter ILDA - XLR
for example
www.thomann.de/de/laserworld_dmx_adapter_ilda_xlr.htm
25Pin Sub-D:
Pin 10 dmx in +
Pin 23 dmx in -
Pin 11 dmx out+
Pin 24 dmx out -
Because this, the enttec interface is actually not supportet.
Using the DMX Input, you are able to trigger the live window functions
The DMX Output is usable to create some DMX Output with the timeline editor... for example to use simple DMX Devices, or to trigger DMX Controller (Software), for example Sunlitesuite or DMX Control....
best regards
Erich
Please Log in or Create an account to join the conversation.