3D-effect on ShowEditor for CS-1000-RGB3D

Good morning,
I have been able to find a solution which works perfectly well.
My goal is to manage Ilda figures from a DMX software or a standard DMX monitor.
You use the DMX cable coming with the ShowEditor box:
- The DMX monitor is linked to the laser with a DMX cable.
- The laser DMX output is linked to the input DMX showeditor box.
Then you setup the DMX switch on the Laser to chose a DMX address that is outside the DMX Showeditor box defined address.
You then select a DMX figure with standard DMX access in Live Show (easy to understand how to setup DMX values to address figures like we do inside the software with the Keyboard or mouse click).
Laser must be "on" and your figure is showing up.
Then when you call the first value of the DMX address of your 3D LaserWorld laser if you setup (channel 44) then your channel 44 will work like this:
- 255 value is normal (no effect on ilda figure)
- between 54 and 71: 3D effect
- between 72 and 89: 2D effect with replication of the figures on a very large full screen
- between 90 and 107: 2D + circle effect around the figure
Hope it helps
Best regards.
Philippe Arnaud