Where has the simulation gone

Hey there,
got problems with the simulation tool. The window is opened but there's no simulation. I also tried to re-install without a positive result.
Any ideas? Thx...

what release are you talking about?
Did you select a hardware type? (options > choose at least one LPT Port)
Try to right-click on background. You will be able to adjust the simulation. Which options did you choose?
After select the reset button simulation should run properly.
If you still struggle delete the file: HE-Laserscan3.ini (Windows folder).

If you still struggle delete the file: HE-Laserscan3.ini (Windows folder).

thanks,
the reset button doesn't help. I haven't used a D / A drane. But if i plug in Lumax it works. I use a 64 bit System. This is not able to communicate with Lumax. This is why I always have to switch to the 32 bit system. So this is no effective solution.

If there isn't plugged in a Lumax the LPT Port should be Chosen automatically. Please let me know what kind of system you are using...

Windows XP 64bit. The ports &H278 ans &H378 are available. But I just come to think of it...Windows XP doesn't permit Access to para ports. Maybe this is the answer

Thanks a lot