- Forum
- English Showeditor Forum
- Creating Own Figures
- General Questions
- Problem with SHOWNET + CS-1000RGBMK2
Problem with SHOWNET + CS-1000RGBMK2
- sweec
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 3
- Dank erhalten: 0
3 Jahre 4 Monate her #943
von sweec
Problem with SHOWNET + CS-1000RGBMK2 wurde erstellt von sweec
Hello, we have a problem exporting ILDA files from Showeditor v7.1 to an SD card.
Shownet does not recognize the ilda files we have created, we have tried all the formats offered when exporting.
running the same files through a timeline creating a show via a network interface on a single laser purchased earlier (2015) works, but the same show does not show on Lasers purchased this year.
The original files that came with the SD card work without any problems on all the devices
Shownet does not recognize the ilda files we have created, we have tried all the formats offered when exporting.
running the same files through a timeline creating a show via a network interface on a single laser purchased earlier (2015) works, but the same show does not show on Lasers purchased this year.
The original files that came with the SD card work without any problems on all the devices
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
3 Jahre 4 Monate her #944
von admin
admin antwortete auf Problem with SHOWNET + CS-1000RGBMK2
Remember to use the correct file names, whicht must only be 000.ild - 255.ild
You need ILDA export format 5 (standard)
If you want to project hot beams or very small patterns, you need to switch the shownet to the professional DMX mode with the Admin Tool - this is for safety reasons.
You need ILDA export format 5 (standard)
If you want to project hot beams or very small patterns, you need to switch the shownet to the professional DMX mode with the Admin Tool - this is for safety reasons.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- sweec
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 3
- Dank erhalten: 0
3 Jahre 4 Monate her #945
von sweec
sweec antwortete auf Problem with SHOWNET + CS-1000RGBMK2
Yes, we named the files 000.ild 001.ild ...
we are trying with a .prg file, the format was set to BGR5, RGB5, BGR6 and RGB6 does not work
But why the timeline shows with the same Shownet equipment working on the laser who bought in 2015, but does not work on the same model who bought this year
we are trying with a .prg file, the format was set to BGR5, RGB5, BGR6 and RGB6 does not work
But why the timeline shows with the same Shownet equipment working on the laser who bought in 2015, but does not work on the same model who bought this year
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
3 Jahre 4 Monate her #946
von admin
admin antwortete auf Problem with SHOWNET + CS-1000RGBMK2
Sind sounds a bit weird. teh ShowNEt does not have any PRG files and does not need any.
please post some pictures of your setup (especially of the ShowNET) to Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein! and I can help you a bit more in detail with this.
Usually everything is compatible out of the box, all the content etc., if there are the rights. So this is somewhat strange.
please post some pictures of your setup (especially of the ShowNET) to Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein! and I can help you a bit more in detail with this.
Usually everything is compatible out of the box, all the content etc., if there are the rights. So this is somewhat strange.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- sweec
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 3
- Dank erhalten: 0
3 Jahre 4 Monate her #947
von sweec
sweec antwortete auf Problem with SHOWNET + CS-1000RGBMK2
I sent e-mail with files.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.