automatic mode
- luucaslcs
- Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
Weniger
Mehr
- Beiträge: 14
- Dank erhalten: 0
10 Monate 2 Wochen her #1435
von luucaslcs
automatic mode wurde erstellt von luucaslcs
How to put my live window on automatic mode?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Tschosef
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_MODERATOR
Weniger
Mehr
- Beiträge: 338
- Dank erhalten: 42
10 Monate 2 Wochen her - 10 Monate 2 Wochen her #1438
von Tschosef
Tschosef antwortete auf automatic mode
Hello,
The live window hase no automatic mode, but there is a exta "Automatic Window" existing in Showeditor.
In the live window you will find a button to open the "automatic window".
The automatic window is using all figure files wich are found in the current folder!
To use this, enable the automatik on different output paths in the automatic window
hope this will help
best regards
erich
The live window hase no automatic mode, but there is a exta "Automatic Window" existing in Showeditor.
In the live window you will find a button to open the "automatic window".
The automatic window is using all figure files wich are found in the current folder!
To use this, enable the automatik on different output paths in the automatic window
hope this will help
best regards
erich
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- luucaslcs
- Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
Weniger
Mehr
- Beiträge: 14
- Dank erhalten: 0
10 Monate 2 Wochen her #1439
von luucaslcs
luucaslcs antwortete auf automatic mode
Anhänge:
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Tschosef
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_MODERATOR
Weniger
Mehr
- Beiträge: 338
- Dank erhalten: 42
10 Monate 2 Wochen her #1440
von Tschosef
Tschosef antwortete auf automatic mode
Hello,
there are different Ways to use Automatic:
The left side of the window is "half automatic" ....
simply click "Start" buttons... for exampe Output Path A, up to 3 buttons and start the Laser-Output.... then the figures will change with the defalut bpm rate 140 ....
to change bpm rate, use the klick Beat button (Click the beat at least 3 times) or enter the value in the texbox
the right side is for "sync with VB-Winamp"...
Winamp was a mp3 play, but it is not longer supportet. But you could try to use it.
You will find the VB Plugin in the Showeditor_V7 Programmfolder. Its name is vblink10.zip
upack the zip file and follow the various instructions. (mostly in german)....
As i told, Winamp is not longer supported... may be it work, may be not.
best regards
Erich
there are different Ways to use Automatic:
The left side of the window is "half automatic" ....
simply click "Start" buttons... for exampe Output Path A, up to 3 buttons and start the Laser-Output.... then the figures will change with the defalut bpm rate 140 ....
to change bpm rate, use the klick Beat button (Click the beat at least 3 times) or enter the value in the texbox
the right side is for "sync with VB-Winamp"...
Winamp was a mp3 play, but it is not longer supportet. But you could try to use it.
You will find the VB Plugin in the Showeditor_V7 Programmfolder. Its name is vblink10.zip
upack the zip file and follow the various instructions. (mostly in german)....
As i told, Winamp is not longer supported... may be it work, may be not.
best regards
Erich
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- luucaslcs
- Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
Weniger
Mehr
- Beiträge: 14
- Dank erhalten: 0
9 Monate 1 Woche her #1445
von luucaslcs
luucaslcs antwortete auf automatic mode
How can I leave the figures for longer time playing back? Because it’s changing very fast like 1sec or less. I want at least 3sec
Bitte Anmelden oder Registrieren um der Konversation beizutreten.