DS-3000 RGB
- branweb
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
2 Jahre 4 Monate her #1111
von branweb
DS-3000 RGB wurde erstellt von branweb
I've just installed Shownet and connected the DS-3000 to the computer. For some reason it is running the free software not the licensed, so the laser isn't switching on. Any reason for this? I thought the DS-3000 comes with built in DAC and free license but can't for the life of me work out how to connect. (currently showing Virtual Interfaces in the Settings>Hardware).
p.s. Is there a DS-3000RGB Mk1 ? How does one tell the difference ? The box mine came in doesn't say Mk2.
p.s. Is there a DS-3000RGB Mk1 ? How does one tell the difference ? The box mine came in doesn't say Mk2.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
2 Jahre 4 Monate her #1112
von admin
admin antwortete auf DS-3000 RGB
99% your firewall blocks the software from connecting with the hardware.
Here is the manual explaining how to get going: www.laserworld.com/en/laser-online-user-...-a-single-laser.html
Here is the manual explaining how to get going: www.laserworld.com/en/laser-online-user-...-a-single-laser.html
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- branweb
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
2 Jahre 4 Monate her - 2 Jahre 4 Monate her #1113
von branweb
branweb antwortete auf DS-3000 RGB
Checked manual. Checked Firewall. Removed Firewall. Still can't see it. If I set the laser to static IP address eg. 192.168.0.52, I can ping it and it's there. But the Admin Tool cannot find it! Any ideas ? By the way, I'm using Windows 10. When I start up Admin Tool it only gives me 2 options (not 3) for checking the firewall to allow the app to work.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
2 Jahre 4 Monate her #1114
von admin
admin antwortete auf DS-3000 RGB
Then it is most likely the firewall.
Please contact Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein! or call the office at +41-71-6778080 and we can help get you sorted.
Please contact Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein! or call the office at +41-71-6778080 and we can help get you sorted.
Folgende Benutzer bedankten sich: branweb
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- branweb
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
2 Jahre 4 Monate her #1115
von branweb
branweb antwortete auf DS-3000 RGB
Can you still ping through a firewall and get a response ?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
2 Jahre 4 Monate her #1116
von admin
admin antwortete auf DS-3000 RGB
Yes, this is quite normal behavior though. The firewall is there to block unwanted traffic, so it does not block Pings, but Software from communication through different ports and interfaces.
For testing purposes try to disable the firewall for all network environments (usually there should be at least 2). If it works then, reactivate the firewall again and add an exception for the software.
You can also rename the folder where your AdminTool is. On restart of the tool it will ask you for FW permissions. There do as the manual says: Tick ALL boxes and confirm. Then it should work.
For testing purposes try to disable the firewall for all network environments (usually there should be at least 2). If it works then, reactivate the firewall again and add an exception for the software.
You can also rename the folder where your AdminTool is. On restart of the tool it will ask you for FW permissions. There do as the manual says: Tick ALL boxes and confirm. Then it should work.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
-
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
-
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
2 Jahre 4 Monate her #1117
von admin
admin antwortete auf DS-3000 RGB
You may also want to try that one for Showeditor to get going (Admin Tool different to that): www.showeditor.com/en/downloads/drivers-...r-showeditor-v7.html
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- branweb
-
Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
-
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
2 Jahre 4 Monate her #1118
von branweb
branweb antwortete auf DS-3000 RGB
Thanks. I've tried this a number of times. I've moved Admin tool to a different folder. I've checked both boxes (only 2) when asking me to allow app to work through for firewall. I've disabled firewall too for private and public and domain. I've checked the connection from the ethernet cable which goes into my switch and then to my computer - this connection can move data so that's fine. I've plugged the ethernet cable directly from laser to mac. Still not working 8.(
The laser however works as I've put it on Demo mode and it fires up.. so this is good news.
The laser however works as I've put it on Demo mode and it fires up.. so this is good news.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.