- Forum
- English Showeditor Forum
- Hardware Configuration and Setup
- ShowNET Configuration
- How to configure PPS in Micro-SD mode playback
How to configure PPS in Micro-SD mode playback
- LaserSpain
- Autor
- Offline
- COM_KUNENA_SAMPLEDATA_RANK1
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
7 Jahre 11 Monate her #165
von LaserSpain
How to configure PPS in Micro-SD mode playback wurde erstellt von LaserSpain
Hi all,
I've managed to export a figure as ild and saved it to micro sd card. Filename is 000.ild.
I just need to play that figure from ShowNET in Micro SD card mode.
ShowNET is not connected to any computer. I need the laser to project that file.
I've managed to make it work correctly but I've found two issues when using playback mode, and I am not able to solve them:
- X and Y axis are reversed. This means that the figure is completely inverted on both axis.
- I don't know how to setup the scanspeed
If I work from ShowEditor, everything is fine. I've managed to set everything up, then copy settings to hardware, as specified in:
www.showeditor.com/en/manual/8-options-s...optimize-output.html
www.showeditor.com/en/manual/8-options-s...-8-9-tab-output.html
However, this "copy settings to hardware" functionality seems to work only with the software. It doesn't write any value to the ShowNET interface itself.
I am using a PM laser with Pangolin ScannerMax 506 scanners, and they don't work at their correct speed when I setup the interface to playback the ILD file from SD Card. The figure is blinking in this mode, but when I use ShowEditor everything is setup correctly.
I've also checked this tutorial, but it seems to work only for Laserworld's ProLine series.
How can I setup ShowNET interface to work with correct PPS and also adjust axis?
Thanks in advance!
Daniel
I've managed to export a figure as ild and saved it to micro sd card. Filename is 000.ild.
I just need to play that figure from ShowNET in Micro SD card mode.
ShowNET is not connected to any computer. I need the laser to project that file.
I've managed to make it work correctly but I've found two issues when using playback mode, and I am not able to solve them:
- X and Y axis are reversed. This means that the figure is completely inverted on both axis.
- I don't know how to setup the scanspeed
If I work from ShowEditor, everything is fine. I've managed to set everything up, then copy settings to hardware, as specified in:
www.showeditor.com/en/manual/8-options-s...optimize-output.html
www.showeditor.com/en/manual/8-options-s...-8-9-tab-output.html
However, this "copy settings to hardware" functionality seems to work only with the software. It doesn't write any value to the ShowNET interface itself.
I am using a PM laser with Pangolin ScannerMax 506 scanners, and they don't work at their correct speed when I setup the interface to playback the ILD file from SD Card. The figure is blinking in this mode, but when I use ShowEditor everything is setup correctly.
I've also checked this tutorial, but it seems to work only for Laserworld's ProLine series.
How can I setup ShowNET interface to work with correct PPS and also adjust axis?
Thanks in advance!
Daniel
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- admin
- Offline
- COM_KUNENA_SAMPLEDATA_RANK_ADMIN
Weniger
Mehr
- Beiträge: 250
- Dank erhalten: 21
7 Jahre 11 Monate her - 7 Jahre 11 Monate her #173
von admin
admin antwortete auf How to configure PPS in Micro-SD mode playback
To set the scan speed for the SD-Card playback system, please follow the instructions given in this tutorial:
www.showeditor.com/en/tutorials-faq/tuto...ownet-interface.html
www.showeditor.com/en/tutorials-faq/tuto...ownet-interface.html
Bitte Anmelden oder Registrieren um der Konversation beizutreten.